Maserati Spyder Bedienungshandbuch Seite 156

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 226
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 155
6
156
If a tire gets a puncture
Open the compressor cover and take
out the pipe with the pressure gauge
H and the electric wire L with the
power plug.
Unscrew the spare wheel's valve cap
and screw down the union M for the
inflating pipe on the valve.
Open the cap of the power plug P,
housed in the right hand side of the
luggage compartment, and insert
the connection L.
–Turn the ignition key to MAR to
supply power to the plug and
activate the compressor pressing
switch N.
Stop the compressor when the
pressure indicated on the pressure
gauge H is 2.5 bar (250 kPa – 35 P.S.I.)
and screw the valve cap.
WARNING We recommend to check
the tire pressure on the gauge when
the compressor is off, in order to have
a preciser reading.
WARNING Do not activate the
compressor for over 20 minutes: risk of
overheating! The compressor has been
designed for inflating the spare wheel
only; do not use it to inflate
mattresses, rubber boats etc.
WARNING Power is supplied to the
current plug only when the key is
turned to MAR and it can only be
connected to devices with a power
absorption of 15A maximum (180W
power). Do not connect devices with a
higher power absorption to the
current plug. A prolonged power
absorption can discharge the battery,
preventing the engine from being
started once again.
Fit the bushing E onto the wrench D
and slacken the 5 fastening studs on
the wheel to be replaced by about
one turn.
L
N
H
M
P
Seitenansicht 155
1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 225 226

Kommentare zu diesen Handbüchern

Keine Kommentare